Home  |  RMA  |  Terms  |  Contact Us  |  Sitemap            

• HOME

• Ruggedized Inverters
• Military Solutions
• Ground Renewable Expeditionary Energy Network Systems (GREENS)
• 1U 1000W Uninterruptible Power Supply Developed for Tactical Local Area Network (TACLAN)

• Power Supplies Home Page
  • MIL-PWR-3000
  • MIL-PWR-6000
  • MIL-PWR-10000
• Vehicle Power Supplies
  • High Power Series
  • Low Power Series
• Intelligent Meters
• Pluggable Redundant Supplies
• Conditioners
• Transformers
• Custom Solutions
• Military Standards
• Literature

1200 Watt Power System

Our overall concept consists of an aluminum sealed case with thermal dispersion via the bottom of the chassis through conduction cooling. This fan free design and will meet all temperature requirements without external or internal airflow. This unit was designed as a ruggedized military power system. The system will be designed with the regulated output of 28VDC. The input will be provided via a Circular Connector and the output via a Circular connector. This power supply is designed with weight and size in mind.

 

The MIL-VIC Power Systems have been designed to comply with all of the radiated emissions, susceptibility and conductive emissions requirement of the applicable sections of MIL-STD-461E.  These techniques have been used successfully by AJPS to comply with these standards many times in the past.  The following is a list of methods used for controlling emissions:

1. Metal Chassis with gaskets on all non sealed interfaces
   
2. EMI Filters on all input and output power lines
   
3. Internal circuitry shielded and isolated
   
4. Ground Planes used for noise isolation
   
5. Connectors area isolation from Conversion Area
   
6. Shielding will be required on Power Cables

The unit will be designed to meet MIL-STD-461E all testing will be the responsibility of the customer.

Data Specifications

Item	Unit of Measure
Input Voltage	VDC	18-36VDC
Output Voltage	VDC	42 Amps @ 28 VDC
Operating Temperature	%	-20C to 50C
Storage Temperature	ºC	-40C to 70C
Overload Protection	%	110 to 180% of full load
Total Output Power	Watts	1200 Watts
Efficiency	%	>84%
Line Regulation	%	0.2% for 10% Line Change
Load Regulation	%	< +/- 1%
Ripple	%	2% of Output Voltage
Current Limit		Over current & Short Circuit Protection
Connector		Circular Connectors
Cooling		Conduction Cooled
Weight	LBS	Est. 8LBS
Over Voltage Protection	VDC	31 - 34 VDC
Set Point Accuracy	%	< +/- 1%
Temperature Regulation	%	.005% / C

Environments

Item	Unit of Measure
Alltitude	Ft	10,000Ft Operating 40,000 Non Operating
Temperature	ºC	-20C to +50C; -40C to +70C
Humidity		MIL-STD-810*
Fungus		MIL-STD-810F Method 508*
Salt Fog		MIL-STD-810F Method 510*
Sand, Dust, and Volcanic Ash		MIL-STD-810F*
Vibration		MIL-STD-810F* / MIL-STD-167*
Functional Shock		MIL-STD-810F* / MIL-S-901*
EMI/EMC		MIL-STD-461C/D*;RE02/102* Shielded Leads

* Compliance via analysis or similarity (Power Supply is designed to meet MIL-Standards, testing is optional but will cost more)